SKL IR HA
Screwed coupling, loose half
Product image
![SKL IR HA SKL IR HA](/data/img/product/SKL_IR_HA.jpg)
Properties
Application |
Hydraulic hammers, rams etc. |
Connection 1 |
BSP cylindrical internal threads |
Sealing form 1 |
for screw-in pins with shapes A, B and if necessary E |
Additional feature |
Replaceable with RoFLEX |
Temp. range |
-25° C to +100° C |
Material |
Steel |
Surface |
electro galvanised |
Description
This coupling has been specially designed for use in the toughest conditions and can withstand severe vibrations and compression.
The inner parts can be replaced when worn (repair possible).
Note
To prevent the hexagonal nuts from coming loose if vibrations occur, they must be securely tightened with a flat spanner.
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
DN* | Connecting thread | AF (mm) |
Coupling thread | Operating pressure (bar) |
---|---|---|---|---|---|
SKL 10 IR HA | 10 | G 3/8" -19 | 45 | Rd. 36x3 | 600,0 |
SKL 13 IR HA | 12 | G 1/2" -14 | 50 | Rd. 40x3 | 450,0 |
SKL 20 IR HA | 19 | G 3/4" -14 | 55 | Rd. 45x3 | 400,0 |
SKL 25 IR HA | 25 | G 1" -11 | 70 | Rd. 58x4 | 350,0 |
SKL 32 IR HA | 31 | G 1.1/4" -11 | 80 | Rd. 65x5 | 320,0 |
SKL 40 IR HA | 38 | G 1.1/2" -11 | 87 | Rd. 75x5 | 300,0 |
DN = Nominal diameter, nominal width – SF gek. = Safety factor coupled – AF = Width across flats
Accessories
![](/images/up.gif)
- SK ZUB SLF HA
- Sealing spring for HA coupling
- SK ZUB AH HA
- Welded-on clip for HA coupling
- SK ZUB DK HA
- Conical nipple for HA coupling
- SK ZUB GR HA
- Threaded ring for HA coupling
- SKL ZUBS GS HA
- Flat spanner for SKL_HA
- SKL ZUBS HA
- Dust protector for SKL..HA
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.