Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
DGM 90
Rotary fitting, angle 90°, ball bearing
Product image
Properties
| Connection 1 |
metric cylindrical outer thread |
| Sealing form 1 |
Shape E |
| Connection 2 |
metric cylindrical outer thread |
| Sealing form 2 |
24° inner cone |
| Design |
Rotary fitting (screw-in connector) |
| Construction type |
Ball bearing |
| Construction |
Angle 90° |
| Scope of supply |
Socket (without union nut and cutting ring) |
| Material |
Steel |
| Surface |
electro galvanised |
Note
Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.
Item
Sort upwards
Sort downwards
 Identification |
Series | Operating pressure | External pipe Ø (mm) |
G | Ø d (mm) |
i (mm) |
L2 (mm) |
l2 (mm) |
l3 (mm) |
S1 | S2 | S3 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DGM 90 NW 03 HS 14 | S | PN 250 | 6 | M 14 x 1.5 | 19 | 12 | 31 | 16,0 | 39,5 | 22 | 17 | 17 |
| DGM 90 NW 04 HS | S | PN 250 | 8 | M 14 x 1.5 | 19 | 12 | 32 | 17,0 | 39,5 | 22 | 19 | 17 |
| DGM 90 NW 08 HS | S | PN 250 | 12 | M 18 x 1.5 | 22 | 12 | 38 | 21,5 | 51,0 | 30 | 24 | 22 |
| DGM 90 NW 13 HS | S | PN 250 | 16 | M 22 x 1.5 | 27 | 14 | 43 | 24,5 | 49,0 | 30 | 30 | 22 |
| DGM 90 NW 16 HS | S | PN 250 | 20 | M 27 x 2 | 32 | 16 | 48 | 26,5 | 67,0 | 41 | 36 | 36 |
| DGM 90 NW 20 HS | S | PN 250 | 25 | M 33 x 2 | 40 | 18 | 54 | 30,0 | 65,0 | 41 | 46 | 36 |
| DGM 90 NW 25 HS | S | PN 250 | 30 | M 42 x 2 | 50 | 20 | 62 | 35,5 | 82,5 | 60 | 50 | 50 |
| DGM 90 NW 32 HS | S | PN 250 | 38 | M 48 x 2 | 55 | 22 | 72 | 41,0 | 80,5 | 60 | 60 | 50 |
Ø = External pipe diameter – PN = Nominal pressure PB = Max. operating pressure – Series: LL = Very light L = Light S = Heavy
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.