FI ND E MA
Filter element for low-pressure filter MAProduct image
Properties
Temp. min. |
-25 °C |
Temp. max. |
120 °C |
Material |
Gasket: NBR |
Operating pressure |
Max. 10 bar |
Item
Sort upwards
Sort downwards
Identification | Filter mesh size (μm) |
Filter area (cm2) |
Qmax (L/min) |
Filter material | L (mm) |
Ø A (mm) |
Ø B (mm) |
Weight (kg) |
---|---|---|---|---|---|---|---|---|
FI ND E MA 0093 A03 | 3,0 | 590 | 15 | inorganic | 93,0 | 47,0 | 25,5 | 0,20 |
FI ND E MA 0030 P25 | 25,0 | 1824 | 80 | organic | 178,0 | 58,0 | 32,2 | 0,27 |
FI ND E MA 0025 M60 | 60,0 | 1575 | 150 | wire mesh | 142,0 | 83,2 | 47,5 | 0,52 |
FI ND E MA 0050 A03 | 3,0 | 4020 | 200 | inorganic | 249,0 | 78,5 | 40,3 | 0,72 |
FI ND E MA 0050 A06 | 6,0 | 4020 | 200 | inorganic | 249,0 | 78,5 | 40,3 | 0,72 |
FI ND E MA 0050 A10 | 10,0 | 4020 | 200 | inorganic | 249,0 | 78,5 | 40,3 | 0,72 |
FI ND E MA 0060 M100 | 100,0 | 4280 | 300 | wire mesh | 265,5 | 83,2 | 47,5 | 0,98 |
FI ND E MA 0040 M60 | 60,0 | 2000 | 330 | wire mesh | 210,0 | 140,0 | 51,0 | 0,79 |
FI ND E MA 0045 P03 | 3,0 | 10000 | 350 | organic | 221,5 | 152,0 | 88,0 | 0,60 |
FI ND E MA 0100 M40 | 40,0 | 6370 | 450 | wire mesh | 372,0 | 83,2 | 47,5 | 0,98 |
FI ND E MA 0100 M60 | 60,0 | 4410 | 450 | wire mesh | 372,0 | 83,2 | 47,5 | 1,42 |
FI ND E MA 0463 A03 | 3,0 | 10650 | 350 | inorganic | 463,0 | 106,0 | 72,0 | 0,95 |
FI ND E MA 0463 A06 | 6,0 | 10650 | 400 | inorganic | 463,0 | 106,0 | 72,0 | 0,95 |
FI ND E MA 0463 A10 | 10,0 | 10650 | 450 | inorganic | 463,0 | 106,0 | 72,0 | 0,95 |
Qmax - max intake volumetric flow – Filter FI ND E MA 0050 *** für Bypass flow filter system NSFA Typ D – Filter FI ND E MA 0463 *** für Bypass flow filter system NSFA Typ E
Spare part for following products
- NSFA Typ D
- Bypass flow filter system Type D
- NSFA Typ E
- Bypass flow filter system Type E
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.