Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
WFG HJOF M (6000 PSI)
SAE flange adapterr ORFS angle 90°
Product image
Properties
| Pressure series |
6000 psi |
| Construction |
Angle 90° |
| Design |
SAE external thread flange |
| Scope of supply |
with 2 flange halves, screw set and O-ring |
| Material |
Steel |
| Surface |
electro galvanised |
Item
Sort upwards
Sort downwards
 Identification |
Pressure PB (bar) |
Size | G1 | Ø D (mm) |
Ø d1 (mm) |
L1 (mm) |
L2 (mm) |
AF (mm) |
|---|---|---|---|---|---|---|---|---|
| WFG 6002 HJOF 12 M | 400 | 3/4" | 1.3/16" -12 UN | 41,5 | 15,5 | 48,0 | 48,0 | 32 |
| WFG 6003 HJOF 16 M | 400 | 1" | 1.7/16" -12 UN | 47,8 | 20,5 | 60,0 | 55,0 | 41 |
| WFG 6004 HJOF 20 M | 350 | 1.1/4" | 1.11/16" -12 UN | 54,2 | 26,0 | 68,0 | 61,0 | 46 |
| WFG 6005 HJOF 24 M | 310 | 1.1/2" | 2" -12 UN | 63,7 | 32,0 | 76,0 | 72,0 | 50 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.