Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HFM KL S / HFM KS S
Measuring connection, plug-in series
Product image
Properties
| Connection 1 |
metric nut thread |
| Sealing form 1 |
24° outer cone with O-ring |
| Connection 2 |
Plug connection for measuring technology |
| Design |
Measuring connection with 24° sealing head (DKO) |
| Standard |
DIN 3865 |
| Series |
light and heavy |
| Scope of supply |
with locking connector and retaining pin |
| Temp. min. |
-20 °C |
| Temp. max. |
100 °C |
| Material |
Steel |
| Surface |
electro galvanised |
Note
Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.
Item
Sort upwards
Sort downwards
 Identification |
Series | External pipe Ø (mm) |
G1 | Max. working pressure (bar) |
OR |
|---|---|---|---|---|---|
| HFM KL 06 S | L | 6 | M 12 x 1.5 | 315 | 4.0 x 1.5 |
| HFM KL 08 S | L | 8 | M 14 x 1.5 | 315 | 6.0 x 1.5 |
| HFM KL 10 S | L | 10 | M 16 x 1.5 | 315 | 7.5 x 1.5 |
| HFM KL 12 S | L | 12 | M 18 x 1.5 | 315 | 9.0 x 1.5 |
| HFM KL 15 S | L | 15 | M 22 x 1.5 | 315 | 12.0 x 2.0 |
| HFM KL 18 S | L | 18 | M 26 x 1.5 | 315 | 15.0 x 2.0 |
| HFM KL 22 S | L | 22 | M 30 x 2 | 160 | 20.0 x 2.0 |
| HFM KL 28 S | L | 28 | M 36 x 2 | 160 | 26.0 x 2.0 |
| HFM KL 35 S | L | 35 | M 45 x 2 | 160 | 32.0 x 2.5 |
| HFM KL 42 S | L | 42 | M 52 x 2 | 160 | 38.0 x 2.5 |
| HFM KS 06 S | S | 6 | M 14 x 1.5 | 400 | 6.0 x 1.5 |
| HFM KS 08 S | S | 8 | M 16 x 1.5 | 400 | 7.5 x 1.5 |
| HFM KS 10 S | S | 10 | M 18 x 1.5 | 400 | 9.0 x 1.5 |
| HFM KS 12 S | S | 12 | M 20 x 1.5 | 400 | 9.0 x 1.5 |
| HFM KS 14 S | S | 14 | M 22 x 1.5 | 400 | 12.0 x 2.0 |
| HFM KS 16 S | S | 16 | M 24 x 1.5 | 400 | 12.0 x 2.0 |
| HFM KS 20 S | S | 20 | M 30 x 2 | 400 | 20.0 x 2.0 |
| HFM KS 25 S | S | 25 | M 36 x 2 | 400 | 26.0 x 2.0 |
| HFM KS 30 S | S | 30 | M 42 x 2 | 400 | 25.3 x 2.4 |
| HFM KS 38 S | S | 38 | M 52 x 2 | 315 | 38.0 x 2.5 |
Series: LL = Very light L = Light S = Heavy
Spare parts
- HFM ST
- Locking connector for plug-in coupling DN 2
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.