Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HFM T HL S / HFM T HS S
Measuring connection, plug-in series
Product image
Properties
| Connection 1 + 2 |
metric cylindrical outer thread |
| Sealing form 1 + 2 |
24° inner cone |
| Connection 3 |
Plug connection for measuring technology |
| Construction |
T shaped |
| Standard |
DIN 2353 ISO 8434-1 |
| Scope of supply |
with locking connector and retaining pin |
| Temp. min. |
-20 °C |
| Temp. max. |
100 °C |
| Material |
Steel |
| Surface |
electro galvanised |
Note
Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.
Item
Sort upwards
Sort downwards
 Identification |
Series | External pipe Ø (mm) |
G1 + G2 | Max. working pressure (bar) |
|---|---|---|---|---|
| HFM T HL 04 S | L | 6 | M 12 x 1.5 | 315 |
| HFM T HL 06 S | L | 8 | M 14 x 1.5 | 315 |
| HFM T HL 08 S | L | 10 | M 16 x 1.5 | 315 |
| HFM T HL 10 S | L | 12 | M 18 x 1.5 | 315 |
| HFM T HL 13 S | L | 15 | M 22 x 1.5 | 315 |
| HFM T HL 16 S | L | 18 | M 26 x 1.5 | 315 |
| HFM T HL 20 S | L | 22 | M 30 x 2 | 160 |
| HFM T HL 25 S | L | 28 | M 36 x 2 | 160 |
| HFM T HL 32 S | L | 35 | M 45 x 2 | 160 |
| HFM T HL 40 S | L | 42 | M 52 x 2 | 160 |
| HFM T HS 03 S | S | 6 | M 14 x 1.5 | 400 |
| HFM T HS 04 S | S | 8 | M 16 x 1.5 | 400 |
| HFM T HS 06 S | S | 10 | M 18 x 1.5 | 400 |
| HFM T HS 08 S | S | 12 | M 20 x 1.5 | 400 |
| HFM T HS 10 S | S | 14 | M 22 x 1.5 | 400 |
| HFM T HS 13 S | S | 16 | M 24 x 1.5 | 400 |
| HFM T HS 16 S | S | 20 | M 30 x 2 | 400 |
| HFM T HS 20 S | S | 25 | M 36 x 2 | 400 |
| HFM T HS 25 S | S | 30 | M 42 x 2 | 400 |
| HFM T HS 32 S | S | 38 | M 52 x 2 | 315 |
Spare parts
- HFM ST
- Locking connector for plug-in coupling DN 2
Product versions
This product is also available in the following designs:
- XHFM T HL S / XHFM T HS S
- Measuring connection, plug-in series, Socket (without union nut and cutting ring)
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.