HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

HK DPH 4

Directional control valve NG25
Hide product imageProduct image
HK DPH 4 data/img/product/HK DPH 4_Kopfgrafik.gif - HK DPH 4
Hide propertiesProperties
Design 4/3-way valve (without pilot valve)
pilot-controlled
Operating pressure P, A, B: max. 350bar / T: max. 210bar
Volumetric flow max. 650 l/min (note characteristic curves)
Connection ISO/Cetop 08 NG25
Mounting 6 No. hex. socket head screw M12x50 12.9
Hide descriptionDescription

These valves are actuated by a leak oil-reduced, solenoid-operated directional control valve size 6 set up as a pilot valve (type HK DHE *P*).
Control is internal, but conversion to external is possible.
The minimum control pressure for correct functioning is 8 bar. With the version with the control pressure generator, an additional pressure drop occurs, which ensures the minimum required control pressure for correct functioning. The version with the control pressure generator must be used if the pressure drop in the valve is below the minimum control pressure.

Hide product tableItem

Sort upwards

Sort downwards

Piston type example: [A/B/PT] = [A blocked / B blocked / P+T connected] 

Hide ordering informationOrdering information

Further circuits and versions, volumetric flows and switching power limits on request

Hide product accessoriesAccessories
HK DHE X 00 DC
Solenoid-operated directional control valve size 6 without coil
HK DHE X 00 AC
Solenoid-operated directional control valve size 6 without coil
HK M HK DPH 4
Set of bolts for NG25 valves type HK DPH 4
Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.