Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK FI AD E0/EV
Adsorber filter single use without valve
Product image
Properties
| Design |
Disposable with activated charcoal filter Integrated filter element 3 μm |
| Connection |
at bottom |
| Installation position |
vertical |
| Temp. range |
-40 °C to +70 °C |
| Material |
Housing: Aluminium and acrylic Gasket: NBR |
Description
These adsorber filters are used for the ventilation of hygroscopic substances of any kind.
Note
Design bases are medium, air flow rate or clunk pick-up volume.
To replace the adsorber cartridge, the connector remains on the machine.
Other variants with housing in aluminum or stainless steel as well as for aggressive media are available on request.
Item
Sort upwards
Sort downwards
 Identification |
Design | Air volume (L/min) |
(L) |
for tank size | (kg) |
A (mm) |
B (mm) |
C (mm) |
G | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|
| HK FI AD 005 E0 N AF | without valve | 5 | 0,12 | ≤ 100 litres | 0,3 | 164,0 | 90,0 | 96,0 | G 3/4” | 0,8 |
| HK FI AD 010 E0 N AF | without valve | 10 | 0,20 | ≤ 100 litres | 0,5 | 222,0 | 90,0 | 96,0 | G 3/4” | 1,2 |
| HK FI AD 020 E0 N AF | without valve | 20 | 0,36 | 100 - 600 litres | 0,9 | 238,0 | 110,0 | 116,0 | G 3/4” | 1,6 |
| HK FI AD 040 E0 N AF | without valve | 40 | 0,56 | 100 - 600 litres | 1,4 | 338,0 | 110,0 | 116,0 | G 3/4” | 2,3 |
| HK FI AD 100 E0 N AF | without valve | 100 | 0,76 | 600 - 1800 litres | 1,9 | 253,0 | 150,0 | 156,0 | G 1" | 3,2 |
| HK FI AD 180 E0 N AF | without valve | 180 | 1,24 | 600 - 1800 litres | 3,1 | 353,0 | 150,0 | 156,0 | G 1" | 4,8 |
| HK FI AD 005 EV N AF | with valve | 5 | 0,12 | ≤ 100 litres | 0,3 | 164,0 | 90,0 | 96,0 | G 3/4” | 0,8 |
| HK FI AD 010 EV N AF | with valve | 10 | 0,20 | ≤ 100 litres | 0,5 | 222,0 | 90,0 | 96,0 | G 3/4” | 1,2 |
| HK FI AD 020 EV N AF | with valve | 20 | 0,36 | 100 - 600 litres | 0,8 | 238,0 | 110,0 | 116,0 | G 3/4” | 1,6 |
| HK FI AD 040 EV N AF | with valve | 40 | 0,56 | 100 - 600 litres | 1,3 | 338,0 | 110,0 | 116,0 | G 3/4” | 2,3 |
| HK FI AD 100 EV N AF | with valve | 100 | 0,76 | 600 - 1800 litres | 2,0 | 253,0 | 150,0 | 156,0 | G 1" | 3,2 |
| HK FI AD 180 EV N AF | with valve | 180 | 1,24 | 600 - 1800 litres | 3,1 | 353,0 | 150,0 | 156,0 | G 1" | 4,8 |
Air volume: Recommended air throughput for optimum drying efficiency
Additional information
In the adsorber the water molecules contained in the air are bounded in the pores of the adsorbent (silica gel). The saturation (charging) and then the necessary replacement of the filter cartridge is indicated by a color change from orange to green.
The valve system prevents unnecessary water absorption from the ambient air during the standstill times. This allows longer service lives of the adsorbent filling.
Silica gel consists of about 99 % of silicon dioxide (SiO2) and is classified as a synthetic polar and hydrophilic desiccant. It possesses due to its high porosity, a large internal surface area of up to 800 m2/g.This enables a very high water holding capacity.
In adsorber filters silica gel is often added with a color indicator. Color changes indicate the water content and therefore the progress of the loading of the desiccant.
According to EU legislation (Regulation EC No 1272/2008) silica gel is not classified as a dangerous substance. It is not subject to classification according to EC Directives (67/548/EEC and 1999/45/EC). Silica gel is not among the health and environmentally hazardous substances.
Ordering information
For tank mounting the mounting flange HK FI AD FS must be ordered if necessary.
Accessories
- HK FI AD FS
- Mounting flange for adsorber
- HK FI AD FS BY
- Mounting flange for adsorber
- HK FI AD FS FILL
- Mounting flange for adsorber
Spare parts
- HK FI AD ET
- Filter element for single use adsorber
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.