Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK FI AD MV VARIO PA
Adsorber filter reusable with valve
Product image
Properties
| Design |
Reusable with activated charcoal filter, with valves high quality valve system Integrated filter element 3 μm stable aluminium-base |
| Connection |
at bottom |
| Installation position |
vertical |
| Temp. range |
-40 °C to +70 °C |
| Material |
Housing: Aluminium and acrylic Gasket: NBR |
Description
These reusable adsorber filters are used for the ventilation of hygroscopic substances of any kind.
Note
Design bases are medium, air flow rate or clunk pick-up volume.
Other variants with housing in aluminum or stainless steel as well as for aggressive media are available on request.
Item
Sort upwards
Sort downwards
 Identification |
Air volume (L/min) |
(L) |
for tank size | (kg) |
A (mm) |
B (mm) |
C (mm) |
G | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|
| HK FI AD 310 MV N AF VPA | 20 | 0,38 | 100 - 600 litres | 0,8 | 311,0 | 110,0 | 148,0 | G 3/4” | 2,3 |
| HK FI AD 330 MV N AF VPA | 40 | 0,48 | 100 - 600 litres | 1,2 | 412,0 | 110,0 | 148,0 | G 3/4” | 3,0 |
| HK FI AD 510 MV N AF VPA | 100 | 0,80 | 600 - 1800 litres | 2,0 | 329,0 | 150,0 | 187,0 | G 1" | 4,6 |
| HK FI AD 560 MV N AF VPA | 210 | 1,72 | 1800 - 3600 litres | 4,3 | 549,0 | 150,0 | 187,0 | G 1" | 7,9 |
Air volume: Recommended air throughput for optimum drying efficiency
Additional information
In the adsorber the water molecules contained in the air are bounded in the pores of the adsorbent (silica gel). The saturation (charging) and then the necessary replacement of the filter cartridge is indicated by a color change from orange to green.
The desing of the reusable adsorber filters, in combination with the activated carbon allows an unlimited number of regenerations of the adsorbents. Additionally, the valve system protects against unnecessary water uptake from the ambient air during the downtime. This allows longer periods of use.
Silica gel consists of about 99 % of silicon dioxide (SiO2) and is classified as a synthetic polar and hydrophilic desiccant. It possesses due to its high porosity, a large internal surface area of up to 800 m2/g.This enables a very high water holding capacity.
In adsorber filters silica gel is often added with a color indicator. Color changes indicate the water content and therefore the progress of the loading of the desiccant.
According to EU legislation (Regulation EC No 1272/2008) silica gel is not classified as a dangerous substance. It is not subject to classification according to EC Directives (67/548/EEC and 1999/45/EC). Silica gel is not among the health and environmentally hazardous substances.
Ordering information
For tank mounting the mounting flange HK FI AD FS must be ordered if necessary.
Accessories
- HK FI AD FS
- Mounting flange for adsorber
- HK FI AD FS BY
- Mounting flange for adsorber
- HK FI AD FS FILL
- Mounting flange for adsorber
Spare parts
- HK FI AD ETS
- Refill-kit for reusable adsorber
- HK FI AD SK
- Adsorbent silicagel
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.