Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK MD
Glycerine pressure gauge up to 1000 bar
Product image
Properties
| Operating pressure |
max. 1000 bar |
| Connection |
at bottom |
| Design |
Pipe spring pressure gauge with glycerine filling |
| Damping |
due to glycerine filling |
Note
Application range at idle load: 3/4 x full scale.
Application range with alternating load: 2/3 x full scale.
Item
Sort upwards
Sort downwards
 Identification |
Diameter (mm) |
Thread | Weight (kg) |
|---|---|---|---|
| HK MD 7100 | 100 | 1/2" NPT | 0,46 |
| HK MD 7063 | 63 | 1/4" NPT | 0,18 |
Ordering information
Other pressure gauges on request.
Accessories
- HK MA
- Pressure gauge adapter 700 bar
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.