HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

HK PG24

Pressure sensor with analogue and digital display
Hide product imageProduct image
HK PG24 data/img/product/HK_PG24_Grafik.gif - HK PG24
Hide propertiesProperties
Operating temperature max. 80 °C
Connection G 1/2" male
Operating voltage 24 V DC
Electrical connection Round plug connector M 12 x 1, 4-pol.
Current consumption < 70 mA at 24 V
Material Stainless steel housing
Parts in contact with media: Stainless steel V2A
Gasket: NBR
Scope of supply without plug
protection class IP 67
Hide descriptionDescription

Electronic pressure sensor with analogue and 4-digit digital display
Housing can be rotated to 350°
1x switch output (can be programmed as NO or NC contact)
1x analogue output 4 to 20/20 to 4 mA
Switching point adjustment range 2 - 400 bar (in increments of 1 bar)
Accuracy ±0.6 % of range limit value

Hide informationNote

Indicator is not visible when the power is disconnected

Hide product tableItem

Sort upwards

Sort downwards

Hide ordering informationOrdering information

Order M12 plug with cable separately

Hide product accessoriesAccessories
HK DSR 4POL
M12 4-pin angle plug with cable
Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.