Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
FH (3000 PSI)
SAE flange half
Product image
Properties
| Pressure series |
3000 psi |
| Design |
SAE flange half |
| Standard |
SAE J518, ISO 6162-1 /-2 |
| Scope of supply |
flange only |
| Material |
Steel |
| Surface |
electro galvanised |
| Mounting |
Screw bore hole |
Note
Recommended screws are listed in the columns M (metr) and M (unc).
Item
Sort upwards
Sort downwards
 Identification |
PB 10.9 (bar) |
Size | A (mm) |
B (mm) |
C (mm) |
D (mm) |
E (mm) |
F (mm) |
G (mm) |
H (mm) |
I (mm) |
L (mm) |
M metr. | M unc |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FH 3001 | 350 | 1/2" | 31,0 | 24,3 | 38,1 | 54 | 8,7 | 22,8 | 19 | 13 | 6,2 | 8,7 | M 8 x 25 | 5/16" x 1.1/4" |
| FH 3002 | 350 | 3/4" | 38,9 | 32,1 | 47,6 | 65 | 11,1 | 25,9 | 22 | 14 | 6,2 | 10,7 | M 10 x 30 | 3/8" x 1.1/4" |
| FH 3003 | 315 | 1" | 45,2 | 38,5 | 52,4 | 70 | 13,1 | 29,2 | 24 | 16 | 7,5 | 10,7 | M 10 x 30 | 3/8" x 1.1/4" |
| FH 3004 | 250 | 1.1/4" | 51,6 | 43,7 | 58,7 | 79 | 15,1 | 36,3 | 22 | 16 | 7,5 | 12,0 | M 10 x 30 | 7/16" x 1.1/2" |
| FH 3005 | 200 | 1.1/2" | 61,1 | 50,8 | 69,9 | 94 | 17,9 | 41,1 | 25 | 16 | 7,5 | 13,5 | M 12 x 35 | 1/2" x 1.1/2" |
| FH 3006 | 200 | 2" | 72,2 | 62,7 | 77,8 | 102 | 21,4 | 48,2 | 26 | 16 | 9,0 | 13,5 | M 12 x 35 | 1/2" x 1.1/2" |
| FH 3007 | 160 | 2.1/2" | 84,9 | 74,9 | 88,9 | 114 | 25,4 | 54,1 | 38 | 19 | 9,0 | 13,5 | M 12 x 40 | 1/2" x 1.1/2" |
| FH 3008 | 160 | 3" | 102,4 | 90,9 | 106,4 | 135 | 31,0 | 65,3 | 41 | 22 | 9,0 | 17,0 | M 16 x 50 | 5/8" x 2" |
| FH 3009 | 35 | 3.1/2" | 115,1 | 102,4 | 120,7 | 152 | 34,9 | 69,5 | 28 | 22 | 10,7 | 17,0 | M 16 x 50 | 5/8" x 2" |
| FH 3010 | 35 | 4" | 127,8 | 115,1 | 130,2 | 162 | 38,9 | 76,0 | 35 | 25 | 10,7 | 17,0 | M 16 x 50 | 5/8" x 2" |
| FH 3011 | 35 | 5" | 153,2 | 140,5 | 152,4 | 184 | 46,0 | 90,0 | 41 | 28 | 10,7 | 17,0 | M 16 x 55 | 5/8" x 2" |
| FH 3014 | 250 | 1.1/4" | 51,6 | 43,7 | 58,7 | 79 | 15,1 | 36,3 | 22 | 16 | 7,5 | 10,7 | M 10 x 30 | - |
| FH 3044 | 250 | 1.1/4" | 51,6 | 43,7 | 58,7 | 79 | 15,1 | 36,3 | 22 | 16 | 7,5 | 12,7 | M 12 x 35 | - |
PN = Nominal pressure PB = Max. operating pressure – Series: LL = Very light L = Light S = Heavy – Ø = External pipe diameter
Accessories
- AFS SCHR M
- Metric screw set, hexagon socket
- AFS SCHR U
- UNC screw set, hexagon socket
- AFS SCHRAUBE
- Hexagon socket screw
Product versions
This product is also available in the following designs:
- SFH (3000 PSI / 6000 PSI) VA
- SAE flange half, Stainless steel
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.