HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

FD C4400

Flat seal
Hide product imageProduct image
FD C4400 data/img/product/FD C4400 Diagramm.jpg - FD C4400
Hide propertiesProperties
Design Universal high-pressure seal for a wide range of sectors
Application food processing
drinking water supply
Chemical industry
Construction type ultra high-performance standard
Approval DIN-DVGW approval, BAM-, HTB approved, KTW recommended, WRC approval
Media Oil
Water
Steam
Gases
Saline solutions
Fuels
Alcohols
organic and inorganic acids
hydrocarbons
Lubricants
Refrigerants
Material aramid fibres, bonded with NBR
Hide descriptionDescription

Technical values for 2 mm thickness:

- compressibility ASTM F36 A = 11%

- resilience ASTM F36 A = 55 %

- creep resistance under load DIN 52913 = 25 MPA (50 MPA, 16 h / 300 °C)

- creep resistance under load BS 7531 = 23 MPA

- Thinning at 23 °C = 10 %

- Thinning at 300 °C = 22 %

- leak tightness according to DIN 3535/6 = 0.2 ml/min

- anti-corrosion aptitude (chloride content soluble) = 150 ppm

- Thickness change according to ASTM F 146 (oil JRM 903: 5 h / 23 °C) = 3 %

- Thickness change according to ASTM F 146 (fuel B: 5 h / 23 °C) = 5 %

- density = 1.6 g/cm3

Hide informationNote

Tolerances:

longitudinal dimension according to DIN 7715 - Part 5 P2,

thickness according to DIN 7715 - Part 5 P3,

surface seals according to DIN 2690 are only standardized to PN 40 bar

Hide product tableItem

Sort upwards

Sort downwards

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.