PN HJR
Swage nipple, JISProduct image
Properties
Application |
Swage nipple for HD 100 to HD 400, KP and TE hoses |
suitable for |
Toyota |
Connection 1 |
BSP external thread, cylindrical |
Sealing form 1 |
60° outer cone |
Standard |
JIS 8363 |
Material |
Steel |
Surface |
electro galvanised |
Note
Choose the appropriate ferrule based on the hose type.
Item
Sort upwards
Sort downwards
Identification | DN | Size | Inches | Operating pressure (bar) |
G1 | L1 (mm) |
S1 |
---|---|---|---|---|---|---|---|
PN 06 HJR | 6 | 4 | 1/4" | 345,0 | G 1/4" -19 | 56,0 | 17 |
PN 08 HJR 10 | 8 | 5 | 5/16" | 345,0 | G 3/8" -19 | 58,5 | 19 |
PN 10 HJR | 10 | 6 | 3/8" | 345,0 | G 3/8" -19 | 60,0 | 19 |
PN 13 HJR | 12 | 8 | 1/2" | 345,0 | G 1/2" -14 | 63,5 | 22 |
PN 20 HJR | 19 | 12 | 3/4" | 275,0 | G 3/4" -14 | 78,0 | 30 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.