PHN 100
Swage ferrule for braided hosesProduct image
Properties
Ferrule type |
Non-skive ferrule |
Material |
Steel |
Surface |
electro galvanised |
Item
Sort upwards
Sort downwards
Identification | DN* | Size | Inches | D1 (mm) |
D3 (mm) |
LF (mm) |
---|---|---|---|---|---|---|
PHN 106 | 6 | 4 | 1/4" | 19,6 | 11,4 | 30,2 |
PHN 108 | 8 | 5 | 5/16" | 20,6 | 12,6 | 30,2 |
PHN 110 | 10 | 6 | 3/8" | 23,2 | 14,2 | 32,0 |
PHN 113 | 12 | 8 | 1/2" | 27,5 | 19,0 | 34,0 |
PHN 116 | 16 | 10 | 5/8" | 31,0 | 22,3 | 37,0 |
PHN 120 | 19 | 12 | 3/4" | 36,0 | 25,0 | 42,5 |
PHN 125 | 25 | 16 | 1" | 42,8 | 30,5 | 50,5 |
PHN 132 | 31 | 20 | 1.1/4" | 51,0 | 37,6 | 59,0 |
DN = Nominal diameter, nominal width
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.