HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

HK PBA

Bent axis axial piston pump
Hide product imageProduct image
HK PBA data/img/product/HK_PBA_Kopfgrafik.jpg - HK PBA
Hide propertiesProperties
Design fixed displacement pump
Viton seals
Leak oil port G 3/8"
Thread pressure side G 3/4" to 63 VFU ccm
G 1" from 80 VFU ccm
Thread suction side G 3/4" to 63 VFU ccm
G 1" from 80 VFU ccm
Scope of supply incl. intake manifold and inspection tube
Hide descriptionDescription

Fixed displacement pump – hole pattern 80 x 80 – dia. 80 – shaft 8x32x16 ISO 14 – threaded fitting
Suction socket Ø 51.8 mm for HK PBA *** 51SF, Suction socket Ø 64.5 mm for HK PBA *** 64SF
Changing rotational direction can be done by changing the setting screw and suction socket. Details can be found in the accompanying instructions.

Hide product tableItem

Sort upwards

Sort downwards

p2 = working pressure  – p3 = maximum pressure 

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.