Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK GR33
Gear pump, size 2, low noise
Product image
Properties
| Design |
low noise |
| Pitch circle pressure side |
30 / M6 |
| Pitch circle suction side |
40 / M8 |
| Material |
Housing: Aluminium Front flange, end cover: Cast steel |
Description
European standard pump – hole pattern 96.2 x 71.5 – dia. 36.5 – taper 1:8 – flange fitting
Due to the special tooth design these pumps achieve a significantly lower noise level. (By comparison: standard gear pump 65-75 dB; gear pump HK GR33 47-57 dB; values for speed range 500-3000 rev/min)
Item
Sort upwards
Sort downwards
 Identification |
VFU (cc) |
p1 max. (bar) |
p2 max. (bar) |
p3 max. (bar) |
A (mm) |
B (mm) |
Direction of rotation | Speed min. (rpm) |
Speed max. (rpm) |
Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|
| HK GR33 2C 010 F2AC4 F D | 10,0 | 275 | 280 | 300 | 122,5 | 53,7 | clockwise rotating | 500 | 3000 | 3,60 |
| HK GR33 2C 013 F2AC4 F D | 13,0 | 265 | 270 | 290 | 127,4 | 56,2 | clockwise rotating | 500 | 3000 | 3,80 |
| HK GR33 2C 015 F2AC4 F D | 15,0 | 240 | 250 | 270 | 132,4 | 58,7 | clockwise rotating | 500 | 3000 | 3,90 |
| HK GR33 2C 018 F2AC4 F D | 18,0 | 205 | 250 | 270 | 138,2 | 61,6 | clockwise rotating | 500 | 3000 | 4,00 |
VFU = conveying volume per revolution – p1 = continuous pressure – p2 = working pressure – p3 = maximum pressure
Ordering information
Further pump versions available on request
Accessories
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.