Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK VS M
Vacuum pump set
Product image
Properties
| Scope of supply |
in the aluminium case 1.5 m electric spiral cable with clips (extendible to approx. 6 m) Vacuum gauge ON/OFF switch Air suction hose with coupling to the tank Pump in 12 V DC or 24 V DC |
Description
The complete solution for clean and environmentally safe working on hydraulic systems:
Leak testing of hydraulic systems by connecting to the tank vent port
Reduction of leaks during repairs to hydraulic systems by creating a vacuum in the system (always use blind plugs near the tank after disconnection)
- when changing suction filter elements installed under the oil surface
- in the event of line fractures during machine and plant operation to avoid leaks
- hose or pipe changing under the oil level of the tank
No draining of the oil necessary
Vacuum to -780 mb
Options: Power supply 230 V AC / 12 V DC or 230 V AC / 24 V DC
Case dimensions: W=235 mm / L=185 mm / H=48 mm
Note
Note: Cyclic duration factor < 60 minutes
Item
Sort upwards
Sort downwards
 Identification |
Voltage | Electrical connection | Power consumption (A) |
Volumetric flow max. (L/min) |
Pump | Weight (kg) |
|---|---|---|---|---|---|---|
| HK VS 2 12M 2008 | 12 V | Battery terminals and plugs | 4,5 | 25,0 | regulated | 3,10 |
| HK VS 2 24M 2010 | 24 V | Battery terminals and plugs | 4,5 | 25,0 | regulated | 6,20 |
Accessories
- HK VS NT
- PSU for vacuum pump set
- HK VSA
- Adapter for tank connection
- HK VSA BJ
- Bayonet adapter for tank connection
- HK STOPF LKM
- Rubber plug with air connection LKM
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.