HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

HK SP 770

Coil for cartridge valve SUN
Hide product imageProduct image
HK SP 770
Hide propertiesProperties
Use for 2/2-way solenoid-operated directional control valve HK DTDA
Corresponding connectors HKSP664, HKSP666, HKSP667, HKSP668
Hide descriptionDescription

Solenoid coil designed for 80% to 120% of the rated voltage at 100% CDF

Hide informationNote

As far as AC coils are concerned, power input is considerably higher in the take-up phase than in the stopping phase. These must therefore never be operated without a magnet core since there is a danger of overheating and the coil can burn through. A similar effect occurs if valves with AC magnets are operated with extremely high pulse frequencies (On / Off). In such cases the coils, which are often in the vicinity of the high power input, can also overheat. For such applications the use of RC coils with rectifier plugs is recommended.
With DC coils extremely high power spikes can occur during powering down. We therefore recommend the use of plugs with protective circuits when using such coils.
A rectifier is integrated into the 230 VAC coil

Hide product tableItem

Sort upwards

Sort downwards

Hide ordering informationOrdering information

Other types of coil on request

Hide product accessoriesAccessories
HK SP DIN 43650
Electrical plug for solenoid coil DIN 43650 / ISO 4400
Hide item spare partsSpare part for following products
HK DTDA
2/2-way solenoid-operated directional control valve DTDA
Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.