K-DMUF ALLGEMEIN
Pressure transmitters for universal industrial applications, nonlinearity 0.25%Product image
Properties
Type |
S-20 |
Voltage |
DC 8 ... 36 V |
Electrical connection |
With right-angle connector acc. to DIN EN 175301-803 A |
Protection IP |
IP 65 acc. to EN 60529 |
Output signal |
4 to 20 mA, 2-wire |
Nonlinearity |
up to 0.25% of span |
Media temperature |
-30 °C to +100 °C |
Ambient temperature |
-40 °C to +70 °C |
Wetted parts |
CrNi steel 1.4571 |
Housing |
CrNi steel 1.4571 |
Description
Pressure transmitters, very high precision, in CrNi steel, for complex measurement tasks in the process industry as well as research and development. Applications: Low temperature or outdoor applications, extreme shock loads and vibration levels, corrosive media in the chemical industry. Compatible with all internationally established process connections.
Item
Sort upwards
Sort downwards
Identification | Measuring range | Thread |
---|---|---|
K- 07 20 12 55 | -1 / 0.0 bar | G 1/2 |
K- 07 20 12 56 | 0 - 0.4 bar | G 1/2 |
K- 07 20 12 57 | 0 - 1.0 bar | G 1/2 |
K- 07 20 12 64 | 0 - 4.0 bar | G 1/2 |
K- 07 20 12 67 | 0 - 6.0 bar | G 1/2 |
K- 07 20 12 58 | 0 - 10.0 bar | G 1/2 |
K- 07 20 12 60 | 0 - 16.0 bar | G 1/2 |
K- 07 20 12 62 | 0 - 25.0 bar | G 1/2 |
K- 07 20 12 65 | 0 - 40.0 bar | G 1/2 |
K- 07 20 12 68 | 0 - 60.0 bar | G 1/2 |
K- 07 20 12 59 | 0 - 100.0 bar | G 1/2 |
K- 07 20 12 61 | 0 - 160.0 bar | G 1/2 |
K- 07 20 12 63 | 0 - 250.0 bar | G 1/2 |
K- 07 20 12 66 | 0 - 400.0 bar | G 1/2 |
K- 07 20 12 69 | 0 - 600.0 bar | G 1/2 |
Additional information
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.