K-DMUF GENAUIGKEIT 0,2%
Pressure transmitters, accuracy 0.2% of span
Product image

Properties
Type |
S-10 |
Voltage |
Non-stabilised 10/30 V DC voltage |
Electrical connection |
With right-angle connector acc. to DIN EN 175301-803 A |
Protection IP |
IP 65 acc. to EN 60529 |
Output signal |
4 to 20 mA, 2-wire |
Nonlinearity |
0.2% of span |
Media temperature |
-30 °C to +100 °C |
Ambient temperature |
-20 °C to +80 °C |
Wetted parts |
CrNi steel 1.4571 |
Housing |
CrNi steel 1.4571 |
Description
Standard type for universal applications. Suitable for electronic pressure measurements in the low and high-pressure ranges.
Item

Sort upwards
Sort downwards
![]() |
Measuring range | Thread |
---|---|---|
K- 07 20 10 30 | -1 / 0.0 bar | G 1/2 |
K- 07 20 10 31 | 0 - 0.25 bar | G 1/2 |
K- 07 20 10 32 | 0 - 0.4 bar | G 1/2 |
K- 07 20 10 33 | 0 - 1.0 bar | G 1/2 |
K- 07 20 10 34 | 0 - 4.0 bar | G 1/2 |
K- 07 20 10 35 | 0 - 6.0 bar | G 1/2 |
K- 07 20 10 36 | 0 - 10.0 bar | G 1/2 |
K- 07 20 10 37 | 0 - 16.0 bar | G 1/2 |
K- 07 20 10 38 | 0 - 25.0 bar | G 1/2 |
K- 07 20 10 39 | 0 - 40.0 bar | G 1/2 |
K- 07 20 10 40 | 0 - 60.0 bar | G 1/2 |
K- 07 20 10 41 | 0 - 100.0 bar | G 1/2 |
K- 07 20 10 42 | 0 - 160.0 bar | G 1/2 |
K- 07 20 10 43 | 0 - 250.0 bar | G 1/2 |
K- 07 20 10 44 | 0 - 400.0 bar | G 1/2 |
K- 07 20 10 45 | 0 - 600.0 bar | G 1/2 |
Additional information
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.