Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-DROSSELPLATT NAMUR VENTIL
Flow regulators for NAMUR valves
Product image
Properties
| Media |
Air, neutral gases, filtered |
| Working pressure |
0.5 to 10 bar |
| Operating temperature |
-20 °C to +70 °C |
| content of delivery |
1 coding pin (not for K-07152240), 2 O-rings, 2 fixing screws |
| Housing |
Aluminium, anodised |
| Material |
Gasket: NBR |
| Sealant |
NBR |
Description
Block-form flow regulator as an intermediate plate between the control valve and actuator acc. to the G 1/4 NAMUR standard. 3/2-way flow regulators: Independent regulation of the forward and return strokes of a single-acting pneumatic actuator. 5/2-way flow regulators: Regulation of the forward and return strokes of a double-acting pneumatic actuator.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Function | Operation | DN | Flow rate (L/min) |
|---|---|---|---|---|
| K- 07 15 22 39 | 3/2-way | Knurled Screw | 5 | 650 |
| K- 07 15 22 40 | 3/2-way | Screwdriver | 5 | 650 |
| K- 07 15 22 41 | 5/2-way | Knurled Screw | 5 | 650 |
| K- 07 15 22 42 | 5/2-way | Screwdriver | 5 | 650 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.