K-DUFR B SCHL SCHL
Flow regulators, flow at both ends, pipe - pipe
Product image
![K-DUFR B SCHL SCHL K-DUFR B SCHL SCHL](/data/img/product/00025251_0.jpg)
![K-DUFR B SCHL SCHL - data/img/product/00042464_0.gif data/img/product/00042464_0.gif - K-DUFR B SCHL SCHL](/data/img/product/00042464_0.gif)
Properties
Operating pressure |
Max. 10 bar |
Flow rate 6,3bar |
155 l/min (Ø 4), 450 l/min (Ø 6), 850 l/min (Ø 8) |
Flow rate of the vent 6.3 bar |
160 l/min (Ø 4), 550 l/min (Ø 6), 950 l/min (Ø 8) |
Adjustment |
Manual or screwdriver |
Temp. range |
-20 °C to +60 °C |
Body |
Technopolymer |
Internal parts |
nickel-plated brass, brass, technopolymer, stainless steel |
Sealant |
NBR |
Installation |
Wall mounting (housing with drilled holes) Bracket mounting (mounting bracket available) Panel mounting (with bracket or lock nut) |
Symbol |
on the housing |
Description
A carefully selected assortment of products for installation in pneumatic circuits. These small, highly efficient components allow all pneumatic functions to be implemented anywhere in the circuit. The series has an ultramodular design.
All components can be installed In parallel, In series, In a mixed parallel / serial configuration. Available as Pipe / pipe connection with two plug connectors Thread / pipe connection, with one plug connector and one nickel-plated brass thread.
Note
Further information on request
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
for hose Ø (mm) |
A (mm) |
B (mm) |
I (mm) |
---|---|---|---|---|
K- 07 15 05 99 | 4 | 42,0 | 35,0 | 12,7 |
K- 07 15 06 00 | 6 | 49,4 | 40,0 | 14,6 |
K- 07 15 06 01 | 8 | 57,3 | 49,0 | 18,7 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.