Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-FI MIKRO O DIFFERENZ MANO
Micro-filters without differential pressure gauge
Product image
Properties
| Input pressure |
Min. 4 bar, Max. 16 bar |
| display range differential pressure gauge |
0 - 2 bar |
| Housing, filter container |
Aluminium |
| Ambient temperature |
+5 °C to +60 °C |
| Filter rating |
0,01 μm |
| Efficiency |
99.9999 % |
| Filter insert |
Borosilicate (with glass-fibre and foam plastic) |
| Flow rate measurement |
At P1 = 6 bar and pressure drop Δp = 1.5% |
Description
Suitable for all applications where the standard centrifugal separators do not afford the desired efficiency. The pre-filters and micro-filters are equipped with an automatic drain valve. All devices can be supplied with or without a differential pressure gauge. The differential pressure gauge indicates the degree of contamination of the filter element as a function of the pressure drop.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | Flow rate (L/min) |
A (mm) |
B2 (mm) |
C (mm) |
D (mm) |
|---|---|---|---|---|---|---|
| K- 07 25 13 10 | G 1/4 | 1300 | 82,5 | 338,0 | 57,0 | 353,0 |
| K- 07 25 13 11 | G 3/8 | 1300 | 82,5 | 338,0 | 57,0 | 353,0 |
| K- 07 25 13 12 | G 1/2 | 1300 | 82,5 | 338,0 | 57,0 | 353,0 |
| K- 07 25 13 13 | G 3/4 | 2000 | 82,5 | 408,0 | 57,0 | 493,0 |
| K- 07 25 13 14 | G 1 | 4080 | 118,0 | 423,0 | 72,0 | 458,0 |
| K- 07 25 13 15 | G 1 1/4 | 4580 | 118,0 | 523,0 | 72,0 | 658,0 |
| K- 07 25 13 16 | G 1 1/2 | 6500 | 118,0 | 623,0 | 72,0 | 858,0 |
| K- 07 25 13 17 | G 2 | 9000 | 118,0 | 813,0 | 72,0 | 1238,0 |
Spare parts
- K-FILTERELEMENT SONDER
- Filter element
- K-VERBINDUNGELEMENTE SOND
- Connecting sets
- K-AUTOMAT ABLASSVENTIL
- Automatic drain valve
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.