K-HRF TANKSTELLENSTECKER
Handheld tyre gauges with twin hold-on connector
Product image
![K-HRF TANKSTELLENSTECKER K-HRF TANKSTELLENSTECKER](/data/img/product/00004970_0.jpg)
Description
Single-lever operation: Inflation, deflation and checking with a single handle. To check - lever in home position. To deflate - lever actuated half-way. To inflate - lever fully actuated. High-quality, concentric pressure gauge 80 mm Ø. Available for the following measuring ranges: 0 to 4 bar/50 psi, 0 to 10 bar/140 psi, 0 to 25 bar/350 psi. These pressure gauges are effectively protected against shock and impact by means of a free-standing plastic cap. They can be loaded against gauge pressure and up to the maximum scale value. With push-in plug for DN 7.2 coupling.
Note
Further information on request
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
Measuring range | Note |
---|---|---|
K- 07 10 04 17 | 0 bis 12 bar/170 psi | Calibrated |
K- 07 10 04 18 | 0 bis 12 bar/170 psi | Uncalibrated |
K- 07 10 04 19 | 0 bis 25 bar/350 psi | Uncalibrated |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.