K-KONDENSA DRUKODRAIM PLUS
Drain for compressed air condensateProduct image
Properties
Filter capacity |
100 m3/min |
Compressor capacity |
10 m3/min |
Dryer capacity |
20 m3/min |
Description
Compact and exceptionally reliable, level-controlled drain for compressed air condensate. The condensate enters the integrated collecting tank, in which the level is continuously monitored. When the condensate reaches the maximum mark, the pilot valve opens and the condensate is forced into the discharge line by the system pressure. The valve closes again when the level reaches the minimum mark. Benefits of »drukodrain plus«: No pressure loss, Diaphragm protected by integrated cup filter, Test button for manual outlet, Auto-reset function, Suitable for all condensate types.
Note
Further information on request
Item
Sort upwards
Sort downwards
Identification | Operating pressure | Voltage |
---|---|---|
K- 07 25 09 24 | 0.2 - 16 bar | 230 VAC / 50 Hz |
Ordering information
The following voltages on request: 24 VDC, 24 VAC DC, 24 VAC / 50 Hz, 110 VAC / 50 Hz, 115 V / 50 Hz
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.