K-LKM 7,8 UWB
Non-interchangeable quick disconnect couplings DN 7.8Product image
Properties
Operating pressure |
0 - 35 bar, maximum static working pressure (non-pulsating) |
Flow rate air |
1.800 l/min (at 6 bar and Δp = 0.5 bar) |
Media temperature |
-20 °C to +100 °C |
Housing |
Brass |
Valve |
Die-cast zinc, nickel-plated |
Unlocking sleeve |
Anodised aluminium |
Spring, snap ring, balls |
stain less steel |
Sealant |
NBR |
Description
One-hand quick disconnect couplings with a large bore. Different media can be connected safely and non-interchangeably even when space is restricted, thanks to the colour-coded coupling and plug and the different coupling profiles defined for each of the four colours. Only couplings and plugs of the same colour fit together.
Note
Standard push-in plugs for couplings DN 5 and DN 7.2 – DN 7.8 are compatible with these non-interchangeable couplings.
Further information on request
Item
Sort upwards
Sort downwards
Identification | Connection | Colour | Length (mm) |
AF (mm) |
---|---|---|---|---|
K- 07 35 08 01 | G 1/4 male | green | 57,5 | 19 |
K- 07 35 08 02 | G 3/8 male | green | 57,5 | 19 |
K- 07 35 08 03 | G 1/4 female | green | 55,5 | 19 |
K- 07 35 08 04 | G 3/8 female | green | 54,5 | 19 |
K- 07 35 08 05 | G 1/4 male | Brown | 57,5 | 19 |
K- 07 35 08 06 | G 3/8 male | Brown | 57,5 | 19 |
K- 07 35 08 07 | G 1/4 female | Brown | 55,5 | 19 |
K- 07 35 08 08 | G 3/8 female | Brown | 54,5 | 19 |
K- 07 35 08 09 | G 1/4 male | blue | 57,5 | 19 |
K- 07 35 08 10 | G 3/8 male | blue | 57,5 | 19 |
K- 07 35 08 11 | G 1/4 female | blue | 55,5 | 19 |
K- 07 35 08 12 | G 3/8 female | blue | 54,5 | 19 |
K- 07 35 08 13 | G 1/4 male | red | 57,5 | 19 |
K- 07 35 08 14 | G 3/8 male | red | 57,5 | 19 |
K- 07 35 08 15 | G 1/4 female | red | 55,5 | 19 |
K- 07 35 08 16 | G 3/8 female | red | 54,5 | 19 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.