Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-L-STECKVER ABSP DREH AG-K
Angle stop valves, swivel type, conical male thread, coated
Product image
Properties
| Working pressure |
Max. 10 bar, vacuum |
| Application |
Air, vacuum |
| Recommended hoses |
PU or PA (nylon) |
| Media |
Compressed air |
| Standard |
R thread acc. to ISO 7-1, thread coating |
| Temp. range |
0 °C to +60 °C |
| Sealing surface |
Conical version: thread coating |
| Material |
Plastic, Nickel plated brass |
| Contact pressure ring |
Plastic |
Description
The air supply is completely shut off as soon as the hose is disconnected from the union.
The flow rate is only guaranteed if the hose is securely inserted.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | for external hose Ø | L1 (mm) |
L2 (mm) |
AF |
|---|---|---|---|---|---|
| K- 07 40 08 53 | R 1/8 | 4 mm | 31,0 | 23,8 | 10 mm |
| K- 07 40 08 54 | R 1/8 | 6 mm | 29,4 | 24,2 | 12 mm |
| K- 07 40 08 55 | R 1/8 | 8 mm | 33,0 | 27,5 | 14 mm |
| K- 07 40 08 51 | R 1/4 | 6 mm | 29,4 | 26,7 | 14 mm |
| K- 07 40 08 52 | R 1/4 | 8 mm | 33,0 | 29,5 | 14 mm |
| K- 07 40 08 50 | R 1/4 | 10 mm | 42,5 | 34,3 | 17 mm |
| K- 07 40 08 58 | R 3/8 | 8 mm | 33,0 | 31,0 | 17 mm |
| K- 07 40 08 56 | R 3/8 | 10 mm | 42,5 | 35,3 | 17 mm |
| K- 07 40 08 57 | R 3/8 | 12 mm | 46,5 | 37,0 | 21 mm |
| K- 07 40 08 48 | R 1/2 | 10 mm | 42,5 | 38,8 | 21 mm |
| K- 07 40 08 49 | R 1/2 | 12 mm | 46,5 | 40,0 | 21 mm |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.