K-MV G (NC) V 24 V DC 1 VA
Normally closed, (NC), pilot-operated, 24 V DC VA stainless steelProduct image
Properties
Electrical connection |
device socket type A in acc. with ISO 4400 for all valves with threads G 3/8 & G 1/2, except valves type 3 & 4. Device socket |
Thread description |
G thread acc. DIN EN ISO 228-1 |
Media temperature |
max. 80 °C when using water or oils; max. 90 °C when using with air |
Protection IP |
IP 65 |
Max. working pressure |
10 bar |
Sealant |
FPM |
Housing, valve seat |
Stainless steel 1.4301 |
Internal parts |
Stainless steel |
Description
Standard series in two different versions: Directly operated, Pilot-operated
Note
Further information on request
Item
Sort upwards
Sort downwards
Identification | min. working pressure (bar) |
Thread | DN | A (mm) |
B (mm) |
C (mm) |
Type |
---|---|---|---|---|---|---|---|
K- 07 30 01 28 | 0,50 | G 1/2 | 15,0 | 70,0 | 70,0 | 107,0 | 3 |
K- 07 30 01 29 | 0,50 | G 3/4 | 20,0 | 70,0 | 82,0 | 115,4 | 3 |
K- 07 30 01 30 | 0,50 | G 1 | 25,0 | 70,0 | 92,0 | 124,0 | 3 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.