K-NEBELOELER MINI
Mini oil-mist lubricator
Product image
![K-NEBELOELER MINI K-NEBELOELER MINI](/data/img/product/00003002_0.jpg)
![K-NEBELOELER MINI - data/img/product/00042580_0.jpg data/img/product/00042580_0.jpg - K-NEBELOELER MINI](/data/img/product/00042580_0.jpg)
Properties
Operating pressure |
min. 2 bar - max. 6 bar |
Media temperature |
max. 50 °C |
Ambient temperature |
Max. 50 °C |
Mounting position/flow direction |
Oil intake at the lowest point/any |
Oil container |
Polycarbonate |
Oil grade |
CL 32 acc. to DIN 51517 - ISO VG 32 |
Description
For mounting on pneumatic impact tools (nail drivers, tackers, screwdrivers) which work intermittently. Also suitable for tools with continuous compressed air demand (grinding and polishing machines). Fixed drip rate: Approx. 0.4 cm3 per 100 work cycles, one filling = 3000 work cycles. Oil consumption in continuous operation (at 6 bar): 0.15 cm3 / Nm3 (varies depending on ambient temperature and oil used).
Note
Further information on request
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
Thread | A (mm) |
B | DN |
---|---|---|---|---|
K- 07 25 09 11 | G 1/4 | 33,0 | 60.0 mm | 8 |
K- 07 25 09 12 | G 3/8 | 33,0 | 60.0 mm | 8 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.