K-NIPPEL KUPPL NW10 AG ROBU
Plugs for couplings DN 10, hardened, galvanised steel, robust type, male
Product image
![K-NIPPEL KUPPL NW10 AG ROBU K-NIPPEL KUPPL NW10 AG ROBU](/data/img/product/00018141_0.jpg)
Properties
Operating pressure |
Max. 16 bar |
Flow rate air |
3.900 l/min |
Temp. range |
-20 °C to +100 °C |
Material |
hardened zinc plated steel |
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
Designation | AF (mm) |
---|---|---|
K- 07 35 00 64 | Plug R 3/8 male | 17 |
K- 07 35 00 65 | Plug R 1/2 male | 22 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.