Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-SCHOTT-STECKVERB IG-K
Male bulkhead connectors, conical female thread
Product image
Properties
| Working pressure |
Max. 15 bar, coarse vacuum |
| Application |
Air, vacuum |
| Recommended hoses |
PU or PA (nylon) |
| Media |
Compressed air and all gases or liquids that are compatible with the materials |
| Temp. range |
-20 °C to +80 °C |
| Sealing surface |
Conical version: thread coating |
| Material |
Plastic, Nickel plated brass |
| Contact pressure ring |
Plastic |
Description
Push-in fittings series manufactured in plastic and nickel-plated brass. All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | for external hose Ø | Thread control panel | L1 (mm) |
AF |
|---|---|---|---|---|---|
| K- 07 40 04 42 | Rc 1/8 | 4 mm | M 12 x 1 | 23,8 | 14 mm |
| K- 07 40 04 43 | Rc 1/8 | 6 mm | M 14 x 1 | 27,0 | 17 mm |
| K- 07 40 04 44 | Rc 1/8 | 8 mm | M 16 x 1 | 32,1 | 19 mm |
| K- 07 40 04 40 | Rc 1/4 | 6 mm | M 14 x 1 | 30,0 | 17 mm |
| K- 07 40 04 41 | Rc 1/4 | 8 mm | M 16 x 1 | 35,1 | 19 mm |
| K- 07 40 04 38 | Rc 1/4 | 10 mm | M 20 x 1 | 36,0 | 24 mm |
| K- 07 40 04 39 | Rc 1/4 | 12 mm | M 22 x 1 | 38,1 | 24 mm |
| K- 07 40 04 45 | Rc 3/8 | 10 mm | M 20 x 1 | 37,0 | 24 mm |
| K- 07 40 04 46 | Rc 3/8 | 12 mm | M 22 x 1 | 39,1 | 24 mm |
| K- 07 40 04 37 | Rc 1/2 | 12 mm | M 22 x 1 | 41,1 | 24 mm |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.