K-SCHUTZROHRE EINSCHWEISS
Weld-in thermowellsProduct image
Properties
Operating pressure |
Max. 25 bar |
length weld cone |
33 mm |
Ø protective tube |
10 mm |
Ø weld cone |
24 mm |
Description
For bimetallic thermometers in the »High quality« series.
Note
Further information on request
Item
Sort upwards
Sort downwards
Identification | Overall length | Material |
---|---|---|
K- 07 20 11 41 | L2 = 43 mm | CrNi steel 1.4571 |
K- 07 20 11 42 | L2 = 80 mm | CrNi steel 1.4571 |
K- 07 20 11 43 | L 2 = 140 mm | CrNi steel 1.4571 |
Accessories
- K-BIMETALLTHERMOMETER 52-2
- Bimetallic thermometers
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.