Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-T AGR
Male branch tees with male G thread
Product image
Properties
| Operating pressure |
Dependent on operating temperature; Max. 10 bar (at 20 °C); Max. 1 bar (at 60 °C) |
| Threaded connection body |
Polyamide (PA) |
| Clamp ring |
Polypropylene (PP) |
| Nut |
Polypropylene (PP) |
Description
Manufactured from high impact-resistant, UV-stabilised engineering plastic, extremely resistant to weathering. Good chemical resistance to benzine, diesel oil, fuel oil and alkalis.
Not suitable for use with acids.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | for hose | L1 (mm) |
L2 (mm) |
|---|---|---|---|---|
| K- 07 40 33 03 | G 1/8 | 4 mm / 6 mm | 52,0 | 20,0 |
| K- 07 40 33 04 | G 1/8 | 6 mm / 8 mm | 62,0 | 20,0 |
| K- 07 40 33 05 | G 1/4 | 4 mm / 6 mm | 54,0 | 27,0 |
| K- 07 40 33 06 | G 1/4 | 6 mm / 8 mm | 62,0 | 27,0 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.