K-TUE IG ES
Female hose fittings with female thread stainless steel
Product image
![K-TUE IG ES K-TUE IG ES](/data/img/product/00048777_0.jpg)
![K-TUE IG ES - data/img/product/00042719_0.gif data/img/product/00042719_0.gif - K-TUE IG ES](/data/img/product/00042719_0.gif)
Properties
Working pressure |
Max. 20 bar |
Material |
Stainless steel 1.4571 |
Note
The dimensions of the standard screw fittings may change slightly during the life of the catalogue as a result of optimisation processes.
Further information on request
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
Thread | for hose | L1 (mm) |
L2 (mm) |
AF |
---|---|---|---|---|---|
K- 07 40 13 30 | G 1/8 | LW 6 mm | 35,0 | 10,0 | 12 mm |
K- 07 40 13 31 | G 1/8 | LW 8 mm | 35,0 | 10,0 | 12 mm |
K- 07 40 13 32 | G 1/4 | LW 6 mm | 36,0 | 11,0 | 17 mm |
K- 07 40 13 33 | G 1/4 | LW 8 mm | 36,0 | 11,0 | 17 mm |
K- 07 40 13 34 | G 1/4 | LW 10 mm | 36,0 | 11,0 | 17 mm |
K- 07 40 13 35 | G 1/4 | LW 13 mm | 40,5 | 11,0 | 17 mm |
K- 07 40 13 36 | G 3/8 | LW 6 mm | 36,0 | 11,0 | 19 mm |
K- 07 40 13 37 | G 3/8 | LW 8 mm | 36,0 | 11,0 | 19 mm |
K- 07 40 13 38 | G 3/8 | LW 10 mm | 36,0 | 11,0 | 19 mm |
K- 07 40 13 39 | G 3/8 | LW 13 mm | 40,5 | 11,0 | 19 mm |
K- 07 40 13 40 | G 1/2 | LW 6 mm | 39,0 | 14,5 | 24 mm |
K- 07 40 13 41 | G 1/2 | LW 8 mm | 39,0 | 14,5 | 24 mm |
K- 07 40 13 42 | G 1/2 | LW 10 mm | 39,0 | 14,5 | 24 mm |
K- 07 40 13 43 | G 1/2 | LW 13 mm | 44,0 | 14,5 | 24 mm |
Additional information
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.