Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-VERSCHLUSSNIPPEL IG MS
Self-sealing plugs, brass
Product image
Properties
| Operating pressure |
See table. All values referred to a medium temperature of 50 °C (static working pressure) |
| Flow rate air |
440 l/min (G 1/8), 840 l/min (G 1/4), 1.280 l/min (G 3/8), 1.950 l/min (G 1/2), 4.500 l/min (G 3/4) (at 6 bar and Δp = 0,5 bar) |
| Media temperature |
-20 °C to +100 °C |
| Housing, sleeve, valve |
Brass |
| Spring, snap ring, balls |
stain less steel |
| Sealant |
NBR |
Description
Hydraulic couplings, both sides sealing, for liquid media acc. to ISO 7241, B Series.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Connection | DN | Operating pressure (bar) |
Length (mm) |
AF (mm) |
|---|---|---|---|---|---|
| K- 07 40 10 15 | G 1/8 female | 4,3 | 250,0 | 29,5 | 14 |
| K- 07 40 10 16 | G 1/4 female | 6,3 | 200,0 | 35,3 | 19 |
| K- 07 40 10 17 | G 3/8 female | 7,5 | 200,0 | 39,0 | 22 |
| K- 07 40 10 18 | G 1/2 female | 11,0 | 150,0 | 48,0 | 27 |
| K- 07 40 10 19 | G 3/4 female | 13,0 | 100,0 | 60,0 | 36 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.