Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-WERKST-SCHLAUCH SOFT O
Workshop hose soft, oil resistant
Product image
Properties
| Inner layer |
Soft-PVC, red, oil resistant |
| Insert |
polyester braid |
| Outer layer |
Soft-PVC, black, oil resistant |
| Temperature |
-20 °C to +60 °C |
| Roll length |
50 m |
Description
Workshop hose to meet the most demanding requirements. Extremely flexible (even at low temperatures), good resistance to oil and chemicals, long service life and excellent resistance to mechanical stresses (deformation under pressure, bending cycles, pressure pulses).
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Ø hose internal (mm) |
Ø hose external (mm) |
Max. working pressure resistance at 23°C (bar) |
Min. bending radius (mm) |
|---|---|---|---|---|
| K- 07 10 10 41 | 6,3 | 11,0 | 16 | 18 |
| K- 07 10 10 42 | 8,0 | 13,0 | 16 | 25 |
| K- 07 10 10 43 | 9,0 | 14,5 | 16 | 25 |
| K- 07 10 10 44 | 10,0 | 15,5 | 16 | 35 |
| K- 07 10 10 45 | 12,7 | 19,0 | 16 | 50 |
| K- 07 10 10 46 | 16,0 | 23,0 | 16 | 70 |
| K- 07 10 10 47 | 19,0 | 26,5 | 16 | 70 |
| K- 07 10 10 48 | 25,0 | 33,5 | 16 | 120 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.