Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-WKV 3/2 SCHLS STECK
3/2-way toggle valves, discharge port on thread, plug-in connector
Product image
Properties
| Operating pressure |
max. 8 bar |
| Temp. range |
0 °C to +70 °C |
| Thread control panel |
M 12 x 0.75 (sheet thickness max. 4 mm) |
| Internal parts |
Brass with a bare metal surface |
| Sealant |
NBR |
| Hollow screw, pivot arm, lifting lever |
Nickel-plated brass |
| Seals (non-detachable) |
Polyamide (glass fibre-reinforced) |
Description
Manually operated toggle valves, 2/2 and 3/2-way types. For all applications where compressed air must be switched on or off quickly and easily or a cylinder operated manually. Designed as a banjo-type valve with a hollow bolt and ring piece. Suitable for screwing directly into the equipment or for panel mounting. Compact type of construction, also ideal where space is restricted.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Design | C (mm) |
for hose | Thread | AF | B (mm) |
|---|---|---|---|---|---|---|
| K- 07 15 07 31 | 3/2-way | 19,5 | 4 mm | G 1/8 | 14 mm | 55,0 |
| K- 07 15 07 32 | 3/2-way | 22,0 | 6 mm | G 1/8 | 14 mm | 55,0 |
| K- 07 15 07 33 | 3/2-way | 22,5 | 8 mm | G 1/8 | 14 mm | 55,0 |
| K- 07 15 07 29 | 3/2-way | 23,5 | 6 mm | G 1/4 | 17 mm | 60,0 |
| K- 07 15 07 30 | 3/2-way | 24,0 | 8 mm | G 1/4 | 17 mm | 60,0 |
| K- 07 15 07 28 | 3/2-way | 26,5 | 10 mm | G 1/4 | 17 mm | 60,0 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.