K-WV 3/2 5/2 NAMUR
3/2 and 5/2-way spool valvesProduct image
Properties
Media |
Air, neutral gases (filtered) |
Differential pressure |
2 - 10 bar |
permissible static pressure |
Max. 10 bar |
Operating temperature |
-25 °C to +60 °C |
Electrical connection |
Connector socket Pg 9P, 3 x DIN 46244 / VDE 0580 |
Housing |
Aluminium, anodised black |
Sealant |
NBR and PUR |
Description
Pilot-operated 3/2 and 5/2-way spool valves with threaded port connections and a NAMUR style interface. The two conversion plates supplied with each valve allow the device to be adapted to a 3/2-way or 5/2-way function. The valve is turned on by a continuous signal. Turning off causes the piston to be returned to its initial position under pressure. Includes a manual operator as standard.
Note
Further information on request
Item
Sort upwards
Sort downwards
Identification | Voltage | Port 1 | Port 3 - 5 | DN | Flow rate (L/min) |
---|---|---|---|---|---|
K- 07 15 00 01 | 230 V, 50 Hz | G 1/4 | G 1/8 | 6 | 700 |
K- 07 15 00 02 | 24 V DC | G 1/4 | G 1/8 | 6 | 700 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.