Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-WV 3/2 5/2 NAMUR LB
3/2 and 5/2-way spool valves with NAMUR style interface
Product image
Properties
| Media |
Air, neutral gases (filtered) |
| Working pressure |
1.5 - 8 bar |
| Operating temperature |
+5 °C to +50 °C |
| Electrical connection |
Plug connector PG 9 |
| Housing |
Aluminium |
| Sealant |
NBR |
Description
Pilot-operated 3/2 and 5/2-way spool valves with threaded ports and a NAMUR style interface. Combines high-quality design with a low price. By adding the conversion plate supplied with each valve, the device can be adapted to a 3/2-way function. The valve is turned on by a continuous signal. Turning off causes the piston to be returned to its initial position under pressure.Includes a manual operator as standard.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Voltage | Port 1 | Port 3 - 5 | DN | Flow rate (L/min) |
|---|---|---|---|---|---|
| K- 07 15 00 09 | 230 V, 50 Hz | G 1/4 | G 1/4 | 8 | 1370 |
| K- 07 15 00 10 | 24 V DC | G 1/4 | G 1/4 | 8 | 1370 |
| K- 07 15 00 11 | 230 V, 50 Hz | G 3/8 | G 1/4 | 10 | 1650 |
| K- 07 15 00 12 | 24 V DC | G 3/8 | G 1/4 | 10 | 1650 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.