K-WV 5/3 ELEKTROPNEU ZENT ENTLUEF4V
5/3-way pilot valve, mid-position exhausted
Product image
![K-WV 5/3 ELEKTROPNEU ZENT ENTLUEF4V K-WV 5/3 ELEKTROPNEU ZENT ENTLUEF4V](/data/img/product/00027060_0.jpg)
![K-WV 5/3 ELEKTROPNEU ZENT ENTLUEF4V - data/img/product/517-3000schalt-38.jpg data/img/product/517-3000schalt-38.jpg - K-WV 5/3 ELEKTROPNEU ZENT ENTLUEF4V](/data/img/product/517-3000schalt-38.jpg)
Properties
Operating pressure |
1.5 - 8 bar |
Temp. range |
-20 °C to +70 °C |
Flow rate measurement |
At P1 = 8 bar, P2 = 6 bar and pressure drop Δp = 1 bar |
Electrical connection |
Connector Type B acc. to ISO 4400 |
min. working pressure |
1,5 bar |
Protection IP |
IP 65 |
Valve body |
Aluminium alloy |
Note
Further information on request
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
Connection | Vent port | Flow rate (L/min) |
circuit diagram number | Voltage | Size |
---|---|---|---|---|---|---|
K- 07 15 03 89 | M 5 | M 5 | 250 | 38 | 24 V DC | 100 |
K- 07 15 03 90 | G 1/8 | G 1/8 | 400 | 38 | 24 V DC | 100 |
K- 07 15 03 91 | G 1/8 | G 1/8 | 550 | 38 | 24 V DC | 200 |
K- 07 15 03 92 | G 1/4 | G 1/8 | 550 | 38 | 24 V DC | 200 |
K- 07 15 03 93 | G 1/4 | G 1/4 | 950 | 38 | 24 V DC | 300 |
K- 07 15 03 94 | G 3/8 | G 1/4 | 950 | 38 | 24 V DC | 300 |
K- 07 15 03 95 | G 1/2" | G 1/2 | 1600 | 38 | 24 V DC | 400 |
K- 07 15 03 96 | M 5 | M 5 | 250 | 38 | 230 V, 50 Hz | 100 |
K- 07 15 03 97 | G 1/8 | G 1/8 | 400 | 38 | 230 V, 50 Hz | 100 |
K- 07 15 03 98 | G 1/8 | G 1/8 | 550 | 38 | 230 V, 50 Hz | 200 |
K- 07 15 03 99 | G 1/4 | G 1/8 | 550 | 38 | 230 V, 50 Hz | 200 |
K- 07 15 04 00 | G 1/4 | G 1/4 | 950 | 38 | 230 V, 50 Hz | 300 |
K- 07 15 04 01 | G 3/8 | G 1/4 | 950 | 38 | 230 V, 50 Hz | 300 |
K- 07 15 04 02 | G 1/2" | G 1/2 | 1600 | 38 | 230 V, 50 Hz | 400 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.