Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
MD 100 AC
Coolant hose
Product image
Properties
| Application |
Coolant (air conditioning technology) |
| Design |
for screw fittings |
| Standard |
SAE J2064 |
| Inner layer |
Butyl = R134a effusion values 65% lower than required according to SAEJ2064. |
| Insert |
very strong steel wire braid |
| Outer layer |
CR = Moisture absorption values 75% lower than required according to SAEJ2064 |
| Colour |
black |
| Temp. min. |
-40 °C |
| Temp. max. |
120 °C |
| Media |
Compressor oils: PAG, ester only for TRITON SE55, SEZ80, Solest oil 35 / 68 Coolants: R134a |
Item
Sort upwards
Sort downwards
 Identification |
DN* | Size | Inches | Internal Ø (mm) |
External Ø (mm) |
Operating pressure (bar) |
Burst pressure (bar) |
Min. bending radius (mm) |
|---|---|---|---|---|---|---|---|---|
| MD 120 AC | 22 | 16 | 7/8" | 22,8 | 31,3 | 35,0 | 175 | 160 |
| MD 125 AC | 28 | 20 | 29,3 | 38,3 | 35,0 | 175 | 195 | |
| MD 132 AC | 35 | 24 | 1.3/8" | 35,5 | 45,6 | 35,0 | 175 | 225 |
DN = Nominal diameter, nominal width
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.