MF MG
Sliding socket
Product image
![MF MG MF MG](/data/img/product/MF_MG_FOTO.jpg)
Properties
Connection 1 + 2 |
BSP cylindrical internal threads |
Temp. min. |
0 °C |
Temp. max. |
120 °C |
Material |
Brass OT 58, steel handle |
Note
The pressure figures are applicable for temperatures from 0 °C to +25 °C; at higher temperatures, pressure reductions must be taken into account.
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
DN* | Size | Operating pressure (bar) |
G1 + G2 | L (mm) |
---|---|---|---|---|---|
MF 06 MG | 6 | 4 | 16,0 | G 1/4" -19 | 33 |
MF 10 MG | 10 | 6 | 16,0 | G 3/8" -19 | 41 |
MF 13 MG | 12 | 8 | 16,0 | G 1/2" -14 | 36 |
MF 20 MG | 19 | 12 | 16,0 | G 3/4" -14 | 39 |
MF 25 MG | 25 | 16 | 16,0 | G 1" -11 | 43 |
MF 32 MG | 31 | 20 | 16,0 | G 1.1/4" -11 | 48 |
MF 40 MG | 38 | 24 | 16,0 | G 1.1/2" -11 | 52 |
MF 50 MG | 51 | 32 | 16,0 | G 2" -11 | 57 |
MF 65 MG | 60 | 40 | 16,0 | G 2.1/2" -11 | 65 |
MF 75 MG | 76 | 48 | 16,0 | G 3" -11 | 75 |
MF 100 MG | 100 | 64 | 16,0 | G 4" -11 | 84 |
DN = Nominal diameter, nominal width – G1 + G2 = Threads of connections 1+2
Ordering information
Other pressure and temperature figures available on request.
Product versions
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.