Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK MH 2025
Digital gauge set
Product image
Properties
| Scope of supply |
1 measuring device HK MH 2025 1 USB-power supply unit 5 VDC, 500 mA 2 NiMH rechargeable batteries 2 pressure sensors with moulded cable (length 2.5 m), pressure ranges, see table 2 MINIMESS® direct connectors for pressure sensors Software Operating manual Plastic case |
| Temp. range |
-20 °C to +70 °C |
Description
Compact measuring device
Direct handling by 5 softkeys
2 channels for industrial sensors (optional 0-20 mA, 4-20 mA, 0-10 V, 2-10 V, frequency, counter)
Calculation of differential pressure or power from 2 channels
ISDS automatic sensor detection
LCD graphic display with switched-mode backlight and automatic display adjustment
2,0 MB memory (5 series of measurements with 120,000 measured values)
Scanning rate selectable in 5 stages between 1 ms and 10 s
Display rate selectable between 0,5 ms and 10 ms
High-speed data transmission to the PC via USB interface
With software HYDROlink Base
Lightweight plastic housing with battery compartment for commercially available NiMH rechargeable batteries
Case dimensions: W=235 mm / L=185 mm / H=48 mm
Item
Sort upwards
Sort downwards
 Identification |
Pressure sensors included | Weight (kg) |
|---|---|---|
| HK MH2025 400 400 | 2x 0 - 400 bar | 3,5 |
| HK MH2025 060 600 | 1x 0 - 60 bar/1x 0 - 600 bar | 3,5 |
Accessories
- HK PT2020
- Pressure sensor
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.