Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
RVM 80 H 1/4
Vacuum pressure gauges without glycerine filling
Product image
Properties
| Design |
Pipe spring pressure gauge without glycerine filling |
| Connection 1 |
BSP external thread, cylindrical |
| Sealing form 1 |
flat seal with pin |
| Connection |
on back, centric |
| Standard |
EN 837-1 |
| Temp. range |
medium max. +60 °C Ambient -20 °C to +60 °C |
Note
Application range at idle load: 3/4 x full scale.
Application range with alternating load: 2/3 x full scale.
Item
Sort upwards
Sort downwards
 Identification |
Nominal size Ø | Scale range | Quality class | Connection |
|---|---|---|---|---|
| RVM 80 -1 +0 H 1/4 | 80 | -1...0 | 1,6 | G 1/4" -19 |
| RVM 80 -1 +0.6 H 1/4 | 80 | -1...+0,6 | 1,6 | G 1/4" -19 |
| RVM 80 -1 +1.5 H 1/4 | 80 | -1...+1,5 | 1,6 | G 1/4" -19 |
| RVM 80 -1 +3 H 1/4 | 80 | -1...+3 | 1,6 | G 1/4" -19 |
| RVM 80 -1 +5 H 1/4 | 80 | -1...+5 | 1,6 | G 1/4" -19 |
| RVM 80 -1 +9 H 1/4 | 80 | -1...+9 | 1,6 | G 1/4" -19 |
| RVM 80 -1 +15 H 1/4 | 80 | -1...+15 | 1,6 | G 1/4" -19 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.