RMM 40 HFR
Pressure gauges without glycerine filling
Product image
![RMM 40 HFR RMM 40 HFR](/data/img/product/RMM_40_HFR_Foto.jpg)
Properties
Design |
Pipe spring pressure gauge without glycerine filling |
Mounting |
Front ring with mounting bores |
Connection 1 |
BSP external thread, cylindrical |
Sealing form 1 |
flat seal with pin |
Connection |
on back, centric |
Standard |
EN 837-1 |
Temp. range |
medium max. +60 °C Ambient -20 °C to +60 °C |
Note
Application range at idle load: 3/4 x full scale.
Application range with alternating load: 2/3 x full scale.
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
Nominal size Ø | Scale range | Quality class | Connection |
---|---|---|---|---|
RMM 40-1 HFR | 40 | 0...1 | 2,5 | G 1/4" -19 |
RMM 40-1.6 HFR | 40 | 0...1,6 | 2,5 | G 1/4" -19 |
RMM 40-2.5 HFR | 40 | 0...2,5 | 2,5 | G 1/4" -19 |
RMM 40-4 HFR | 40 | 0...4 | 2,5 | G 1/4" -19 |
RMM 40-6 HFR | 40 | 0...6 | 2,5 | G 1/4" -19 |
RMM 40-10 HFR | 40 | 0...10 | 2,5 | G 1/4" -19 |
RMM 40-16 HFR | 40 | 0...16 | 2,5 | G 1/4" -19 |
RMM 40-25 HFR | 40 | 0...25 | 2,5 | G 1/4" -19 |
RMM 40-40 HFR | 40 | 0...40 | 2,5 | G 1/4" -19 |
RMM 40-60 HFR | 40 | 0...60 | 2,5 | G 1/4" -19 |
RMM 40-100 HFR | 40 | 0...100 | 2,5 | G 1/4" -19 |
RMM 40-160 HFR | 40 | 0...160 | 2,5 | G 1/4" -19 |
RMM 40-250 HFR | 40 | 0...250 | 2,5 | G 1/4" -19 |
RMM 40-315 HFR | 40 | 0...315 | 2,5 | G 1/4" -19 |
RMM 40-400 HFR | 40 | 0...400 | 2,5 | G 1/4" -19 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.