ND 100
Low pressure and plug-in hose
Product image

Properties
Application |
Low pressure circuits (no pressure surge loads or critical applications) Return hoses Pneumatic controllers |
Inner layer |
oil resistant synthetic rubber |
Insert |
one braided textile insert |
Outer layer |
oil resistant and weatherproof synthetic rubber |
Colour |
grey |
Temp. min. |
-40 °C |
Temp. max. |
100 °C |
Media |
Mineral oil Antifreeze solutions Air (up to + 70°C) Water (0°C to + 85°C) Water-oil emulsions |
Item

Sort upwards
Sort downwards
![]() |
DN* | Size | Inches | Internal Ø min. (mm) |
Internal Ø max. (mm) |
External Ø min. (mm) |
External Ø max. (mm) |
Operating pressure (bar) |
Test pressure (bar) |
Burst pressure (bar) |
Min. bending radius (mm) |
---|---|---|---|---|---|---|---|---|---|---|---|
ND 106 | 6 | 4 | 1/4" | 5,9 | 6,9 | 11,9 | 13,5 | 17,0 | 42 | 68 | 65 |
ND 110 | 10 | 6 | 3/8" | 9,0 | 10,0 | 15,1 | 16,7 | 17,0 | 42 | 68 | 80 |
ND 113 | 12 | 8 | 1/2" | 12,1 | 13,3 | 19,0 | 20,6 | 17,0 | 42 | 68 | 100 |
DN = Nominal diameter, nominal width
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.