PA 500 AOB 90 A
Swage fitting, DKOR angle 90°
Product image
![PA 500 AOB 90 A PA 500 AOB 90 A](/data/img/product/PA_700_AOB_90.jpg)
![PA 500 AOB 90 A - data/img/product/PA_xxx_AOS(AOB,AOL)_90_MEx.gif data/img/product/PA_xxx_AOS(AOB,AOL)_90_MEx.gif - PA 500 AOB 90 A](/data/img/product/PA_xxx_AOS(AOB,AOL)_90_MEx.gif)
Properties
Application |
Swage fitting for HD 500 hoses |
Connection 1 |
BSP nut thread |
Sealing form 1 |
60° outer cone with O-ring |
Short code |
DKOR |
Standard |
ISO 8434-6 BS 5200 |
Integration |
with pull-out protection (interlock) |
Scope of supply |
Swage nipple + swage ferrule |
Material |
Steel |
Surface |
electro galvanised |
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
DN | Size | Inches | G1 | L1 (mm) |
L2 (mm) |
S1 | OR |
---|---|---|---|---|---|---|---|---|
PA 720 AOB 90 | 19 | 12 | 3/4" | G 3/4" -14 | 127,5 | 68,2 | 32 | 17.1 x 1.6 |
PA 725 AOB 90 | 25 | 16 | 1" | G 1" -11 | 158,0 | 81,7 | 41 | 22.1 x 1.6 |
PA 532 AOB 90 A | 31 | 20 | 1.1/4" | G 1.1/4" -11 | 182,0 | 106,5 | 50 | 29.1 x 1.6 |
PA 540 AOB 90 A | 38 | 24 | 1.1/2" | G 1.1/2" -11 | 215,5 | 123,5 | 60 | 35.1 x 1.6 |
PA 550 AOB 90 A | 51 | 32 | 2" | G 2" -11 | 250,5 | 146,0 | 70 | 48.1 x 1.6 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.