Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
PA 500 SF A
Swage fitting, SFL
Product image
Properties
| Application |
Swage fitting for HD 500 hoses |
| Connection 1 |
SAE flange connection 3000 PSI |
| Sealing form 1 |
flat seal with SF O-ring |
| Short code |
SFL |
| Standard |
SAE J518 ISO 6162-1 |
| Integration |
with pull-out protection (interlock) |
| Scope of supply |
Swage nipple + swage ferrule |
| Material |
Steel |
| Surface |
electro galvanised |
Item
Sort upwards
Sort downwards
 Identification |
DN | Size | Inches | Flange size | D (mm) |
H (mm) |
L1 (mm) |
|---|---|---|---|---|---|---|---|
| PA 720 SF | 19 | 12 | 3/4" | 3/4" | 38,1 | 6,8 | 116,5 |
| PA 720 SF 25 | 19 | 12 | 3/4" | 1" | 44,5 | 8,1 | 119,5 |
| PA 725 SF 20 | 25 | 16 | 1" | 3/4" | 38,1 | 6,8 | 132,0 |
| PA 725 SF | 25 | 16 | 1" | 1" | 44,5 | 8,1 | 135,5 |
| PA 725 SF 32 | 25 | 16 | 1" | 1.1/4" | 50,8 | 8,1 | 138,5 |
| PA 532 SF 25 A | 31 | 20 | 1.1/4" | 1" | 44,5 | 8,1 | 145,0 |
| PA 532 SF A | 31 | 20 | 1.1/4" | 1.1/4" | 50,8 | 8,1 | 148,5 |
| PA 532 SF 40 A | 31 | 20 | 1.1/4" | 1.1/2" | 60,3 | 8,1 | 151,5 |
| PA 540 SF 32 A | 38 | 24 | 1.1/2" | 1.1/4" | 50,8 | 8,1 | 158,0 |
| PA 540 SF A | 38 | 24 | 1.1/2" | 1.1/2" | 60,3 | 8,1 | 166,5 |
| PA 540 SF 50 A | 38 | 24 | 1.1/2" | 2" | 71,4 | 9,6 | 169,5 |
| PA 550 SF A | 51 | 32 | 2" | 2" | 71,4 | 9,6 | 183,5 |
Product versions
This product is also available in the following designs:
- PA 500 SF VA
- Swage fitting, SFL, Stainless steel
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.