PA 700 AOS 45
Swage fitting, DKOS angle 45°Product image
Properties
Application |
Swage fitting for HD 400 hoses |
Connection 1 |
metric nut thread |
Sealing form 1 |
24° outer cone with O-ring |
Short code |
DKOS |
Standard |
ISO 8434-1 |
Integration |
with pull-out protection (interlock) |
Scope of supply |
Swage nipple + swage ferrule |
Material |
Steel |
Surface |
electro galvanised |
Series |
heavy |
Item
Sort upwards
Sort downwards
Identification | DN | Size | Inches | Operating pressure (bar) |
G1 | for external pipe Ø (mm) |
L1 (mm) |
S1 | L2 (mm) |
OR |
---|---|---|---|---|---|---|---|---|---|---|
PA 710 AOS 08 45 | 10 | 6 | 3/8" | 630,0 | M 20 x 1.5 | 12 | - | 24 | - | 10.0 x 1.5 |
PA 710 AOS 45 | 10 | 6 | 3/8" | 630,0 | M 22 x 1.5 | 14 | 94,2 | 27 | - | 12.0 x 2.0 |
PA 713 AOS 45 | 12 | 8 | 1/2" | 420,0 | M 24 x 1.5 | 16 | 95,0 | 30 | 21,5 | 13.0 x 2.0 |
PA 713 AOS 16 45 | 12 | 8 | 1/2" | 420,0 | M 30 x 2 | 20 | 108,0 | 36 | 27,0 | 17.5 x 2.5 |
PA 716 AOS 45 | 16 | 10 | 3/8" | 420,0 | M 30 x 2 | 20 | 118,0 | 36 | 27,0 | 17.5 x 2.5 |
PA 720 AOS 16 45 | 19 | 12 | 3/4" | 420,0 | M 30 x 2 | 20 | 133,0 | 36 | 27,0 | 16.0 x 2.5 |
PA 720 AOS 45 | 19 | 12 | 3/4" | 420,0 | M 36 x 2 | 25 | 136,0 | 46 | 30,0 | 20.0 x 2.5 |
PA 720 AOS 25 45 | 19 | 12 | 3/4" | 420,0 | M 42 x 2 | 30 | 142,0 | 50 | 35,0 | 27.0 x 2.5 |
PA 725 AOS 20 45 | 25 | 16 | 1" | 420,0 | M 36 x 2 | 25 | 156,5 | 41 | 34,5 | 20.0 x 2.5 |
PA 725 AOS 45 | 25 | 16 | 1" | 420,0 | M 42 x 2 | 30 | 164,0 | 50 | 34,5 | 25.0 x 2.5 |
PA 725 AOS 32 45 | 25 | 16 | 1" | 420,0 | M 52 x 2 | 38 | 170,0 | 60 | 41,0 | 33.0 x 2.5 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.